Please note that you only need the last update. This upgrades all previous versions. The following updates are available:
PED Profesional
Version 5.3.0 (2011)New Version 5.3:
Directive 2010/35/EU on transportable pressure equipment
Additionally the some smaller bugs were fixed and many improvements.
Version 5.2.0 (2011)New Version 5.2:
- Material database containing selected material values, individual expandable
- Calculation of the test pressure for the hydrostatic water pressure test acc. to EN 13445-5
- Calculation of the carbon equivalent CET
Additionally the some smaller bugs were fixed and many improvements.
Version 5.1.0 (2009)The update 5.1 contains the following amendments:
The Directive 87/404/EEC (simple pressure vessel) was replaced with the Directive 2009/105/EEC (codified version). You will find the new version in the software.
For vessels with a volume smaller or equal than 0,1 L the guideline 1/05 is implemented in the categorization module.
Additionally the some smaller bugs were fixed.
Version 5.0.0 (2008)CD ROM PED Professional Version 5 of TÜV SÜD.
In addition to the adaptation to Windows Vista, Version 5 offers new modules and functions, such as the possibility to create single expertises for materials, you don’t find in the European standards. Naturally the well-tried functions (interactive applications, hazard analysis, operating instructions, assistant for printed forms and templates etc.) still exist.
Base version - no online update available! Download the flyer for more information. Users of our annual update service will receive the new CD ROM automatically.
Version 4.6.0 (2008)The update 4.6 contains the following amendments:
Revised, editorially amended guidelines:
1/45 Exclusion of Article 1
4/12 Scope of products in QM approval notification document
Version 4.5.0 (2007)The update 4.5 contains the following amendments:
Revised, editorially amended
1/41 LPG tanks for fork lifts
2/5 Warm water generators with TS of 120 C
2/16 Pressure Regulators
5/6 Protective Device
7/5 Required documents for compliance of materials
7/17 Necessity of impact tests
7/20 withdrawn (was included into 7/21)
7/21 Particular Material Appraisal (PMA)
New guidelines:
1/52 Electrical power cookers
General
Amendment of the program in order to create the possibility to install PED 4.0 under Windows Vista.
Version 4.4.0 (2007)The update 4.4 contains the following amendments:
Revised, editorially amended and new guidelines:
1/40 Meaning of pressure bearing housing
4/12 Scope of products in QM approval notification document
7/4 Suitable means for traceability
Module “European Approvals for Materials”
The module “European Approvals for Materials” was supplemented with 19 new materials (Nickel Alloys) which were published in the Official Journal of the European Union 2006/C123/05
Additionally the European Approvals for Materials which were freely access able were added in the library as pdf.- files
General
Improvements of the program performance and editorial updates were incorporated.
Version 4.3.0 (2006)The update 4.3 contains the following subjects
Revised, editorially amended and new guidelines:
2/07 Fluids with the symbol T or T+
2/19 Two housings, designed to contain fluids under pressure and which have a
common boundary
2/23 Classification of a solar panel
3/17 Assembly not equipped with protective devices
4/12 Information concerning the scope of products
4/13 Delegate the witnessing of the final inspection and proof test
6/01 Permanent joining
7/02 Quality (assurance) systems of material manufacturers
7/16 Quality-assurance system of material manufacturer
10/06 Information in the Declaration of Conformity
Module “Declaration of Conformity”
The module “declaration of conformity” was supplemented with an Italian version which can be addressed in the output section of the module.
Version 4.2.0 (2005)Update 4.2 containing the following amendments:
Editorially amended Guidelines
1/8 What is a pressure accessory?
7/16 Quality Assurance system – material manufacturer
8/13 Small pressure accessories and safety accessories
10/2 Used pressure equipment from the outside of the European economic area
Revised Guidelines
1/29 Pipeline reduction station
5/7 Limits in Annex I, section 2.2.2
New Guidelines adopted
7/5 Documentation prepared by the material manufacturer
10/8 Declaration of Conformity of assemblies
Additionally the following modules were amended:
- An error occurring after the change of language of an already filled out declaration of conformity was corrected
- The integration of the Company logo into the hazard analysis has been improved.
Version 4.1.0 (2005)Following you receive a summary on the changes and improvements which were incorporated in version PED 4.1:
1. The database for the materials with an European Approval was
completely revised and updated. Up to now, EAMs were issued only for nickel alloys. In the future also titanium alloys will be added.
2. A series of smaller bugs e.g. the selection of the database for dangerous fluids in the categorisation module, the use of non-square shaped logos were corrected.
Version 4.0.0 (2005)
|
BetrSichV Version 2
Version 2.8.0 (2011)Die Neuerungen des Updates 2.8 beinhalten:
Alle geänderten und neuen Leitlinien zum Stand Oktober 2010, sowie alle Änderungen der Technischen Regel für Betriebssicherheit TRBS des Jahres 2010.
Version 2.7.0 (2010)Das Update 2.7 zur BetrSichV CD ROM beinhaltet:
Neu: Bestimmung der Prüfzuständigkeiten von einfachen Druckbehältern.
Neu: Aufnahme der Richtlinie für einfache Druckbehälter (RICHTLINIE 2009/105/EG) als verlinkter Nachschlagetext.
Version 2.6.0 (2009)Das Update 2.6 zur BetrSichV CD ROM beinhaltet:
Neu: TRBS 1201 Teil 3 - Instandsetzung an Geräten, Schutzsystemen, Sicherheits-, Kontroll- und Regelvorrichtungen im Sinne der Richtlinie 94/9/EG – Ermittlung der Prüfnotwendigkeit gemäß § 14 Abs. 6 BetrSichV.
Neu: TRBS 2153 - Vermeidung von Zündgefahren infolge elektrostatischer Aufladungen.
Anpassung an PED Professional 5:
Import von Daten nun möglich.
---
Bitte sagen Sie uns Ihre Meinung zu netinform und gewinnen Sie mit etwas Glück ein eBook. Teilnahem unter www.netinform.de!
Version 2.5.0 (2009)Das Update 2.5 zur BetrSichV CD ROM beinhaltet:
Betriebssicherheitsverordnung - Integration der Neufassung vom 18. Dezember 2008
Technische Regeln für Betriebssicherheit (TRBS) - TRBS 1201 - Teil 2: Prüfungen bei Gefährdungen durch Dampf und Druck
- TRBS 2152 - Teil 4: Maßnahmen des konstruktiven Explosionsschutzes, welche die Auswirkung einer Explosion auf ein unbedenkliches Maß beschränken
Version 2.4.0 (2008)Das Update 2.4 zur BetrSichV CD ROM beinhaltet:
--- Technische Regeln für Betriebssicherheit (TRBS):
TRBS 1201 Teil 2 Prüfungen bei Gefährdungen durch Dampf und Druck
--- Neue oder geänderte Leitlinien:
A 7.8 zu Anhang 1 Punkt 2.5 „Schutz vor herausfliegenden Teilen“
A 7.9 zu Anhang 1 Punkt 2.8 „unbeabsichtigtes Erreichen von Gefahrstellen“
A 7.11 zu Anhang 2.18 BetrSichV „Schutz gegen direktes oder indirektes Berühren ..
B 12.2 zu § 12 „Betrieb überwachungsbedürftiger Anlagen“
B 15.8 zu § 15 Abs. 4 „Überprüfung der sicherheitstechnischen Bewertung durch die ZÜS“
B 15.9 zu § 15 Abs. 3 „Delegierung der Betreibermitteilung“
B 15.10 zu § 15 Abs. 1 und 4 „Auswahl der ZÜS“
B 15.11 zu § 15 Abs. 1, 3 und 4 „Reihenfolge Prüffristabstimmung - Betreibermitteilung “
B 15.15 zu § 15 „Bisher nicht durch Sachverständige wiederkehrend zu prüfende [...] Anlagen“
B 21.1 (gestrichen)
C 1.5 zu § 1 Abs. 2 Nr. 1 Buchstabe b „Umfang von Druckbehälteranlagen“
Version 2.3.0 (2008)Bei Problemen mit dem heruntergeladenen Update starten Sie die Datei >>SetupBetrSichV230.exe<< bitte manuell oder benutzen Sie unsere Online - Seite: http://www.netinform.de/Shop/UpdateInfo.aspx !
Das Update 2.3 zur BetrSichV CD ROM beinhaltet:
Technische Regeln für Betriebssicherheit (TRBS):
TRBS 1151 Gefährdungen an der Schnittstelle Mensch - Arbeitsmittel - Ergonomische und menschliche Faktoren
TRBS 2141 - Teil 1 - Versagen der drucktragenden Wandung durch Abweichen von zulässigen Betriebsparametern
Neue Leitlinien:
B 15.17 zu § 15 Abs. 17 „Beantragung einer Prüffristverlängerung bei der zuständigen Behörde durch den Betreiber“
C 1.11 zu § 1 Abs. 2 Nr. 1 „Eingruppierung von Dampfkesseln“
E 6.6 zu § 6 „Explosionsschutzdokument für Tankfahrzeuge“
Version 2.2.0 (2008)Das Update 2.2 beinhaltet:
Neue (4) und geänderte (17) Leitlinien zur BetrSichV
Kleinere Bug fixes
Version 2.1.0 (2007)Das Update 2.1 beinhaltet:
Neue Technische Regeln zur Betriebssicherheitsverordnung:
TRBS 1001 Strukur und Anwendung
TRBS 1111 Gefährdungsbeurteilung und sicherheitstechnische Bewertung
TRBS 1121 Änderungen und wesentliche Veränderungen von Aufzugsanlagen
TRBS 1201 Prüfungen von Arbeitsmitteln und überwachungsbedürftigen Anlagen
TRBS 1201 - Teil 1 - Prüfung von Anlagen in explosionsgefährdeten Bereichen und Überprüfung von Arbeitsplätzen in explosionsgefährdeten Bereichen
TRBS 2111 - Mechanische Gefährdungen - Allgemeine Anforderungen
TRBS 2111 - Teil 2 - Mechanische Gefährdungen - Maßnahmen zum Schutz vor unkontrolliert bewegten Teilen
TRBS 2111 - Teil 3 - Mechanische Gefährdungen - Maßnahmen zum Schutz vor gefährlichen Oberflächen
TRBS 2121 Gefährdung von Personen durch Absturz - Allgemeine Anforderungen
TRBS 2141 Gefährdung durch Dampf und Druck - Allgemeine Anforderungen
TRBS 2181 Schutz vor Gefährdungen beim Eingeschlossensein in Pers
Version 2.0.0 (2006)
|
GHS Expert
Version 1.1.0 (2011)Update 1.1 zu GHS Expert
Alle Änderungen zur GHS - Verordnung und zu Reach sind in die konsolidierte Fassung eingearbeitet.
Die Einstufung und Kennzeichnung vieler Stoffe wurde durch die Änderungsverordnung Nr. 790/2009 geändert. Alle Änderungen sind eingearbeitet.
Darüber hinaus wurden einige „Bugs“ behoben.
Version 1.0.0 (2009)Baseversion
|